Description
03-13 RAM 2500/3500 6″ UNCHAINED 3.5″ SHOCK PACKAGE
Brand: Carli Suspension
SKU: CS-DUC35SPKG-6-03-D
- Carli Custom Tuned
- King 3.5″ Remote Reservoir Front Shocks
- Carli Tuned – King 3.0″, 4-Tube Bypass Reservoir Rear Shocks
- 17-4 Stainless Steel Shock Shafts
- Short Reservoir Mounts & Limit Straps Included
- Fitment: 2003-12 Ram 2500/3500 4×4, Diesel
- Requires 6″ Carli Coils and 4″ Full Progressive Leaf Springs
Kit Includes:
- AS-DUC35SPKG-6-03-D-LA – Carli Tuned King 3″ Front, 3.0″ Bypass Rear Shock Package
- CS-SRM-2.5 – Short Reservoir Mounts, 2.5″
- CS-DLSK620 – Limit Strap Kit
Installation Notes: Shock Towers and Rear Crossmember Gussets required. Coil buckets must be bored to 4.5″ upper and lower. Both Axle Truss and Rear Shock Mounts highly recommended.
Kit Options
ADD Fabricated Shock Tower
- Dodge 5.25in Tall Fabricated Shock Tower +$
- SKU: CS-DFST525
- Unchained, 6″ Specific
- 1/4″ Cold Rolled Steel
- Fully Gusseted and Braced
- 3/8″ Stud Ring for extreme durability
- Black Powdercoat Finish
- Height: 5.25″ from base to center of shock bolt
ADD Rear Shock Mount – Driver
- Rear Shock Mount, Driver, 2003-12 | +$
- SKU: CS-DRSMD
- Replaces weak Driver’s side factory shock mount
- Necessity when running 3.0″ rear shocks
- Combines 3/16″ and 1/4″ Steel for Strength
- WILL NOT FIT 2013-2500/3500
- WELD-ON Fabrication Part
ADD Rear Shock Mount – Passenger
- Rear Shock Mount, Passenger, 2003-12 | +$
- SKU: CS-DRSMP
- Replaces Passenger side factory shock mount
- Combines 3/16″ and 1/4″ Steel for Strength
- Good insurance when installing Driver’s side
- WELD-ON Fabrication Part
ADD Gusset Kit
- Dominator Rear Gusset Kit +$
- SKU: CS-D30GUSSET
- 1/4″ Cold-Rolled Steel Gussets
- Replace and box section of spare tire crossmember removed for 3.0″ shock clearance
ADD Reservoir Rock Guard
- Reservoir Rock Guard +$
- SKU: CS-RRG
- Shock Reservoir Protection
- Stainless Hose Clamps
- Sold Individually
- Recommended for Rear shock leaning forward from the axle
- Fitment: Any 2.5″, 3.0″ or 3.5″ Shock with 2.5″ Reservoir
ADD Hole Saw/Arbor
- 4.5″ Hole Saw & Arbor +$
- SKU: CS-HOLESAWKIT-4.5
- Bore Ram Upper and Lower Coil Buckets to 4.5″
- Coil Bucket Fit 3.5″ Diameter King Shocks once bored
- Milwaukee 7/16″ Shank Arbor
- Milwaukee 4.5″ Bi-Metal Hole Saw
:
- Fitment: 2003-2013 Ram 2500 4×4 Diesel
- Fitment: 2003-2012 Ram 3500 4×4 Diesel
- For: 6″ Front Lift
- For: 4″ Rear Lift
- Addition Fabricated Axle Truss is highly recommended
- 5.25″ Shock Towers Required: CS-DFST525 (Not Included)
- Rear Fabricated Shock Mounts Required: CS-DRSMP + CS-DRSMD (Not Included)
- Dominator Gusset Kit Required: CS-D30GUSSET (Not Included)
System Notes:
- 12″ Front Wheel Travel
- 13″ Rear Wheel Travel
- King 3.5″/3.0″, Remote-Reservoir, Carli Tuned Shocks
- Best Improved Handling
- Best Improved Control
- Very Plush On-Road Ride
- Best Off-Road Capability
- Most Bottom-Out Resistance
Reviews
There are no reviews yet.