Fuel Injector Clinic 2150cc Fuel Injectors: Chrysler / Dodge / Jeep Hemi & SRT 2003 – 2023

Description

Fuel Injector Clinic 2150cc Fuel Injectors

03-25 Chrysler / Dodge / Ram / Jeep Hemi & SRT

IS153-2150H

Fuel Injector Clinic’s 2150cc/min high-impedance fuel injectors are engineered for extreme high-performance applications requiring maximum fuel delivery with precise throttle response. Flowing 200lbs/hr at 3 bar (43.5psi) and 240lbs/hr (2500cc/min) at 4 bar (58psi), this set of eight saturated injectors is ideal for naturally aspirated or forced-induction engines where low-end pulse width control is critical.Each injector is supplied brand-new with factory-style O-rings and includes solder-in pigtails (PGTDEN8) or optional plug-and-play adapters (PADPDtoU8) for easy installation. These injectors are not compatible with MTBE oxygenated fuels such as Q16 or VP Import, and care should be taken when exposed to alcohol-based fuels to avoid corrosion during prolonged disuse.Using Fuel Injector Clinic’s proprietary Data Match Technology, each injector is individually flow-matched and serial-numbered, providing detailed latency and performance data via a Data Match Sheet. This ensures precise ECU control, particularly during sub-2ms pulse width conditions at idle and part-throttle.Flow-tested at 90°F using CF-16B calibration fluid and rated at 43.5psi (3 bar), these injectors provide superior linearity, atomization, and short pulse width repeatability. They offer excellent drivability and tuning flexibility, even at extreme fuel flow rates.Backed by a lifetime warranty, these injectors combine maximum performance with reliability. For non-standard setups, optional plug-and-play adapters or included solder-in pigtails allow seamless installation without modifying the wiring harness.

Flow Rate:

• 2150cc/min (200lbs/hr) @ 43.5psi (3 bar)
• 2500cc/min (240lbs/hr) @ 58psi (4 bar)

Injector Type:

• Saturated / High Impedance
• Advanced short pulse width control
• Not compatible with MTBE oxygenated fuels (Q16, VP Import)

Fitment & Installation:

• Drop-in fitment with factory-style connectors
• Includes all required O-rings
• Solder-in pigtails included (PGTDEN8)
• Optional plug-and-play adapters (PADPDtoU8) available

Performance & Technology:

• Precision flow-matched with Data Match Technology
• Individually serial-numbered with Data Match Sheet
• Excellent linearity and fuel atomization
• Tested at 90°F using CF-16B calibration fluid

Fuel Compatibility:

• Pump gas, E85, and other non-MTBE fuels

Warranty:

• Lifetime warranty against defects in original manufacturing